Skip to content

ps2-card -- KiCad

Built by the bespoke gen_ps2.py (placement: the two mini-DIN-6 sockets on the bottom edge, the four status LEDs on the right, the bus connector on the left) from the canonical gen_eagle netlist (CARDS["ps2-card"]: an ATmega1284P behind a 74HCT374/74HCT244 latch bridge), to the same standard as the memory card: 4-layer (F/B signals, In1=GND, In2=VCC planes), a bypass cap above each IC, part values on silk. Routed with Freerouting. GENERATORS ARE CANON -- edit gen_ps2.py (or the netlist in gen_eagle.py) and re-run build.sh here (or generators/build.sh ps2-card).

File What
p8x-ps2-card.kicad_pcb the board
p8x-ps2-card.ses the Freerouting routing
p8x-ps2-card-gerbers.zip orderable gerbers
p8x-ps2-card-placement.pdf parts placement (refs+values)
p8x-ps2-card-render-top.png / -3d.png renders

Exotic parts use the closest standard KiCad footprint (flagged when built).

Last updated 2 October 2026